In this guide we show you how to install a carousel kitchen storage unit. This sounds like a tricky job but really it’s just down to measurements. Once you have everything measured accurately, installing the unit is fairly straightforward.
Measure the distance from the back corner of the cupboard to the front corner (where the door sits).
Depending on the shelf diameter you have purchased, measure your A and B measurements. A should be either 81mm or 124mm from the edge of the cupboard; B should be either 57mm or 100mm from the edge of the cupboard.
These should give you the point at which you affix the base of the spindle.
Make the same measurements at the top of the cupboard, and screw into place the top fixing for the spindle.
Push the plastic coverings over the holes in the shelves and lay in place before pushing the spindle through central holes.
Make sure you put the top cover for the spindle in place before fixing it to the base and top.
The base of the spindle should easily slot into the fixed base.
Slot the top of the spindle onto the fixture, and screw the top cover into place
You can now move the shelf stoppers along the spindle and adjust the height of the shelves as required.
VIDEO VIDEO